|
|
Solution Page
The compatible Canon Pixus MP-730 yellow (4482A003AA) cartridge that I Refilled is leaking
If the ink flows out of the exit port when you attempt to
refill the cartridge, the exit port is not sealed properly:
- You need to clean and dry the area around the exit port before you try to seal it with the tape. I also find it helpful to keep a finger on the tape while I am refilling the cartridge just to make sure the ink doesn't leak out.
(D7) |
|
If your cartridge is not holding the ink you injected after you have completed
all of the refill steps, the set screw seal is not airtight:
- Seal the outlet port and remove the set screw.
- You can use a little wax around the threads of the set screw, or just tighten it down a bit more, to get the required seal.
(D2) |
|
Click Here to buy a compatible Canon Pixus MP-730 yellow (4482A003AA) Cartridge or Refill Kit
|