|
|
Solution Page
The Toner-Level on the 1710587-006 cartridge that I Refilled isn't working
Try the following if your Minolta MagiColor 2400, or 2430, machines is still reading the cartridge as empty:
Minolta MagiColor 2400
-
Double click MagiColor 2400W Status Display icon in System Tray, OR go to Start/Programs/Konica Minolta MagiColor 2400W utilities and
select KONICA MINOLTA MagiColor 2400W Status.
-
In the dialog box, select Printer form the menu bar. Then select Mode setting from drop down.
-
You will then uncheck Auto Toner Replace.
-
Turn the machine off, then on. You might get a low toner message, but you will be able to
continue to print.
Minolta MagiColor 2430
-
Panel should say "Ready"
-
Press MENU/SELECT button
-
Press Right arrow button until you see ENGINE
-
Press MENU/SELECT button
-
Press Right arrow button until you see TONER EMPTY
-
Press MENU/SELECT button
-
Press Right arrow
button until you see the desired state for the action; when toner is empty, or out.
(TC2) |
|
Click Here to buy a new 1710587-006 Cartridge or Refill Kit
|