|
|
Solution Page
The compatible 30-050 cartridge that I Refilled is leaking
If your cartridge is leaking while you are refilling it
through a fill hole that you made in the cartridge:
- The fill hole may need to be enlarged so that it is big enough for the
needle to fit in it with room to spare so air can escape as you inject the
ink. If the needle is a snug fit in the hole that you made, the hole
should be enlarged so that air can get out of the cartridge through the fill
hole while you are refilling the cartridge. If the hole is not bigger
than the width of the needle, a vacuum may force the ink to squirt out of
the cartridge and make a mess.
(D17) |
|
If your cartridge is leaking heavily after you have
completed all of the refill steps, the seal may not be completely air tight:
-
First of all, it is normal for a cartridge to leak for up to an hour after
refilling it! These cartridges need some time to stabilize.
-
Check the fill hole seal to make sure that it is air tight. Reseal, if necessary, to ensure that the
fill hole area is properly sealed.
(D1) |
|
Click Here to buy a compatible 30-050 Cartridge or Refill Kit
|