The Printer Ink Warehouse - Great Prices on Printer Cartridges, Ink & Toner Refill Kits, Bulk Ink & Toner
The Printer Ink Warehouse

Great Prices on Printer Cartridges
Ink & Toner Refill Kits  -  Bulk Ink & Toner

  thousands of satisfied customers Thousands of Satisfied Customers
 Full One Year Satisfaction Guarantee Full 1 Year Satisfaction Guarantee
 Free Shipping for Orders > $45 Free Shipping for Orders > $45
Call Us:  269-649-5492 Your Account     |     View Cart  
 
  Take Up To 15% Off Our Already Low Prices

Simply click this box to bookmark this site
 
Same-Day Shipping Guarantee
(Click for full information)
 
cartridge locator ★ Help Me Find My Cartridge
 
Toner Refill Kits Toner Refill Kits
 
Ink Refills Kits Ink Refills Kits
 
bulk toner Bulk Toner
 
bulk ink Bulk Ink
 
Cartridge Chips and Fuses Cartridge Chips and Fuses
 
 

Solution Page

The compatible T009201  (Epson T009) cartridge that I Refilled is not accepted by the printer

The chip on the cartridge may need to be reset to a "full" status with our chip resetter.

NOTE:  You may want to remove the guide on the chip resetter and line the resetter and chip up manually.  

  • Line up the 7 prongs on the chip resetter with the seven electronic pads on the chip that is on your cartridge.  
  • Once you have them lined up, press the resetter to the chip.  
  • You will see a red light, a flashing red light, and then a green light.  This takes less than 10 seconds.
  • Once you get the green light showing on the chip resetter, the chip has been successfully reset to read a "full" status when you place it back into your machine.

(A4)


There may be a problem with the connection between the chip on the cartridge and the chip reader in the machine:
  • Remove the cartridge from the machine.
  • Clean off the chip on the cartridge  with isopropyl (rubbing) alcohol to ensure a good connection.
  • It is a good idea to clean the area in the machine that reads the chip on the cartridge as well.  You can use canned air to remove any debris that might be on the area in the machine that reads the electronics on the cartridge, or you can blow on the area in the machine to remove any loose debris that is present.

NOTE:  Cleaning both the cartridge and the machine this way will help to ensure a good connection between the two.

(A9)


If the cartridge does not read a full status when you place it into the machine, the guide on the chip resetter may not be allowing you to line up the prongs on the chip resetter to the pads on the chip properly:
  • Remove the guide from the chip resetter and attempt to reset the guide by lining up the 7 prongs on it to the 7 pads that are on the chip
  • Once you have them properly aligned, press the resetter to the chip until the light on the chip resetter turns green.
  • You will see a red light, a flashing red light, and then a green light.
  • Once you get the green light, the chip has been successfully reset to read a "full" status when you place it back into your machine.

(A6)


If the chip resetter light is not working at all when you attempt to reset a chip on one of your cartridges:
  • Remove the screws on the chip resetter and remove the cover. 
  • Carefully take out the circuit board inside and turn it over. 
  • You should see the batteries at this point on the circuit board. Carefully remove and/or reseat them into their holding slots.
  • Carefully put the chip resetter back together and test it.
  • If you are still not getting the light to come on, the chip resetter likely needs new batteries to be installed.

(A7)


Click Here to buy a compatible T009201  (Epson T009) Cartridge or Refill Kit








 
Troubleshooting |  Contact Information |  Frequently Asked Questions |  Return Policy / Guarantee |  Privacy Policy |  About Us |  Payments Accepted
 
Refill Accessories |  Ink Refills |  Toner Refills |  Bulk Ink |  Bulk Toner |  All Cartridges |  Laser Toner Cartridges |  Spot, Versatile & Quick Dry Cartridges